MAGNUM COMBUSTIBLE GAS DETECTOR
The Magnum Combustible Gas Detector is an intelligent industrial gas detector designed for safe continuous monitoring of combustible gases and vapors in the 0-100% LEL (Lower Explosive Limit) range. Poison resistant catalytic bead (pellistor type) continuous diffusion low temperature sensors are standard. These units feature the latest advanced microprocessor technology providing reliable, fast, accurate and continuous monitoring of combustible gases in the most extreme hazardous environments.
The Controller/Display features a highly visible bright red alpha numeric “8” character LED display that indicates alarm and status in all light conditions. Detector health and configuration are communicated clearly with full scrolling text messages. Resetting alarms and system configuration is achieved non-intrusively by a magnetically activated Reed Switch or a Push Button located on the display.
The rugged explosion proof Magnum Series has been thoroughly tested and is performance certified to military temperature specifications for both Division and Zones. All associated electronic circuit boards have been additionally certified Class I, Div2/Zone2, maintaining hazardous area certification even with the enclosures covers removed.
Low power consumption is standard requiring as little as 1.2Watts to power these units and a wide voltage range 9 to 28Vdc, these detectors are suited to applications with either 24Vdc or 12Vdc power such as solar applications.
Optional relays are available and provide the ability to directly trigger shutdown conditions or signal audible or visual alarming devices. Two styles of relays are available; Mechanical (general purpose) or Solid State (for low powered applications such as solar).
The most innovative of designers, latest technology and high tech components make Xtreme Safety products, intuitively responsive, accurate and dependable in the most extreme conditions.
Please contact our sales department for a full product demonstration.
———————————————————————————————————–
FEATURES
- Manufactured in Calgary
- CSA C22.2 No. 152 Performance Certified for hazardous locations
- CSA Certified for both Canada and the USA for both Division and Zone
- Highly visible display and status LED’s
- Certified -55 to +85 Degrees Celsius for both the electronics and the enclosures
- Wide Voltage Range 9Vdc-28Vdc
- Low power consumption 1.2W @ 12Vdc nominal
- No Seals required for Div2/Zone 2
- Sensor separation is >2,000 feet
- Non-intrusive Calibration and Menu access with rare earth magnet (attached)
- Optional Relays available: Mechanical or Solid State
- Power to the sensor can be removed through the Menu
- Multiple methods for Resetting an Alarm or Latching condition
- All enclosures are NEMA 4X
- Sensor Separation is included
- Remote Calibration / Splash Guards included
- No tools required to remove display faceplate
- Repositionable display allows for conduit entries to be top, bottom, left or right
- Captive display remains attached when removed
- Extendible sensor life
- Sensors can be rebuilt
- Industrial spring type terminals on all connection points